Test on the pull-off performance of building thermal insulation products

Tensile properties are the main performance of exterior wall insulation systems, because thermal insulation products are used as the middle layer of exterior wall insulation systems in most cases. The pull-off resistance test of building thermal insulation products can determine the pull-off performance of the external wall insulation system. The fixation method of the system is mechanical fixation or a combination of mechanical fixation and adhesive fixation.
Zhongke Testing Reliability Experiment Center has the capability of reliability testing of various building insulation products, and provides professional reliability testing services such as pull-off performance testing for building insulation products.

Inorganic fibrous products: asbestos products, mineral wool products, glass wool products, ceramic fiber products
Inorganic granular products: expanded vermiculite products, expanded perlite products
Inorganic porous products: diatomite products, microporous calcium silicate products, foam glass products, foam concrete and aerated concrete products

The foam block test is used to determine the pull-off resistance of external wall insulation systems. Pull-off resistance is calculated using the maximum tensile load.
1. Apply a tensile load perpendicular to the surface of the specimen in accordance with the method specified in ISO 29765. Unless otherwise specified or negotiated, load at a speed of (10±1) mm/min until the specimen fails.
2. Record the maximum tensile load. If the bonding layer between the sample and the foam block is damaged or the bonding layer between the foam block and the wood board is damaged, the test results will be invalid.

GB/T 34011-2017 Thermal insulation products for buildings - Determination of pull-off performance of external wall insulation systems (foam block test)
ISO 12968: 2010 Thermal insulation products for construction - Determination of the pull-off performance of external wall insulation systems (foam block test)
ISO 3251 Determination of non-volatile content of paints, varnishes and plastics
ISO 3386-1 Polymeric poroelastic materials - Determination of compressive stress and strain properties - Part 1: Low density materials
ISO 3451-1 Plastics - Determination of ash content Part 1: General method
ISO 9229 Thermal insulation material terminology
ISO 29465 Thermal insulation products for building use Determination of length and width
ISO 29466 Thermal insulation products for building use Determination of thickness
ISO 29470 Thermal insulation products for buildings Determination of apparent density
ISO 29765 Thermal insulation products for building use Determination of tensile strength perpendicular to the surface
EN 206-1 Concrete Part 1: Specifications, properties, production and evaluation
0 EN 1015-1 Test methods for mortars for masonry use Part 1: Determination of particle size distribution (analytical sieve method)
1 EN 13499 Thermal insulation products for building use Polystyrene exterior wall insulation systems Specifications