Ozone aging test of automobile parts

Aging refers to the phenomenon that the performance of a sample deteriorates over time when exposed to natural or artificial environmental conditions. The ozone aging test simulates and strengthens the ozone conditions in the atmosphere. The sample is exposed to air containing a constant ozone concentration and a constant-temperature test chamber, and the cracks of the sample are inspected according to a predetermined time.
The auto parts ozone aging test can determine the ozone aging performance of auto parts. Zhongke Testing Reliability Experiment Center has the reliability performance of various automobile parts and provides professional ozone aging test services for automobile parts.

1. Suitable for auto parts and auto metal parts made of plastic, rubber, artificial leather, fiber, etc.
2. Automobile parts mainly include engine parts, transmission system parts, braking system parts, steering system parts, driving system parts and electrical instrument parts. Such as: throttle body, engine, engine assembly, oil pump, clutch, transmission, universal joint, steering wheel, steering shaft, steering column, frame, axle, suspension, etc.

1. The test equipment has an internal volume of 0.11~0.14m³. The length and width dimensions are roughly the same. The air heating part is placed in a position that has no adverse effect on the ozone concentration. The air inside is circulating and equipped with a device to display the ventilation flow rate.
2. Number of ozone concentration measurements: Measure once every 15 mm after placing the sample, and once a day after 3 hours.

QC/T 17-1992 General rules for weather resistance testing of automobile parts
GB 250 dye fastness fading sample card
GB 2410 Transparent plastic light transmittance and haze test method
GB 2918 Standard environment for conditioning and testing of plastic specimens
GB 2941 Standard temperature, humidity and time for parking and testing of rubber samples
GB 3511 Rubber atmospheric aging test method
GB 3681 Plastic natural weather exposure test method
GB 9754 Paints and varnishes Paints without metallic pigments Determination of paint film without specular gloss at 20°, 60° and 85°
GB 9277.2 Evaluation of aging of paint coatings Part 2 Evaluation of blistering grade
GB 9277.3 Evaluation of Aging of Paint Coatings Part 3 Evaluation of Rust Level
GB 9277.4 Evaluation of aging of paint coatings Part 4 Evaluation of cracking grade
0 GB 9277.5 Evaluation of aging of paint coatings Part 5 Evaluation of peeling grade
1 GB 1767 Determination of weather resistance of paint films