Mechanical products hot and humid environment test

The main effects of cold environments on mechanical products are: metal parts are corroded due to unclean internal air or condensation generated when temperature changes; high humidity in hot and humid areas causes moisture deterioration of oil media; condensation leads to reduced surface insulation and current leakage; lubricating grease, hydraulic and hydraulic media and coolant are agglomerated and hardened, deliquesced, deteriorated, mold grows, excessively oxidized, and cause metal corrosion.
After the mechanical products in hot and humid areas pass the basic performance test, they should pass the relevant artificial simulated environmental test assessment based on the impact of environmental factors on various products. The wet and hot environment test of mechanical products can select different test items according to the influence of environmental factors.
Zhongke Testing Reliability Experiment Center has various environmental testing capabilities for mechanical products and provides professional hot and humid environment testing services for mechanical products.

General-purpose machinery products used in hot and humid climate areas, including agricultural machinery, internal combustion engines, engineering machinery, mining machinery, heavy machinery, lifting and transportation machinery, petrochemical general machinery, electrical products, instruments and meters, machine tools, general parts, etc.

High temperature test
Constant heat and humidity test
Alternating heat and humidity test
Mold growth test
Salt spray test (or neutral salt spray test NSS)
Alternating salt spray test Acetate salt spray test (ASS)
Copper Accelerated Acetate Salt Spray Test (CASS)
Corrosion paste test (CORR)
Electrolytic Corrosion Test (EC)
Temperature change test
Simulating solar radiation test on the ground
0 Shell protection test (anti-solid foreign matter and waterproof test)

GB/T 14093.1-2009 Environmental technical requirements for mechanical products Hot and humid environment
GB/T 2423.2-2008 Environmental testing of electrical and electronic products Part 2: Test methods Test B: High temperature
GB/T 2423.3-2006 Environmental testing of electrical and electronic products Part 2: Test method Test Cab: Constant humidity and heat test
GB/T 2423.4-2008 Environmental testing of electrical and electronic products Part 2: Test method Test Db alternating damp heat (12 h + 12 h cycle)
GB/T 2423.16-2008 Environmental testing of electrical and electronic products Part 2: Test methods Test J and guidelines; mold growth
GB/T 2423.17-2008 Environmental testing of electrical and electronic products Part 2: Test method Test Ka: Salt spray
GB/T 2423.18-2000 Environmental testing of electrical and electronic products Part 2: Test Test Kb: Salt spray, alternating (sodium chloride solution)
GB/T 2423.22-2002 Environmental testing of electrical and electronic products Part 2: Test method Test N: Temperature change
GB/T 2423.24-1995 Environmental testing of electrical and electronic products Part 2: Test method Test Sa: Simulating solar radiation on the ground
GB 4208-2008 Enclosure protection level (IP code)
GB/T 4768-2008 Mildew-proof packaging