Adhesion strength test between rubber and hard plate

Vulcanized rubber or thermoplastic rubber and hard plate bonding strength test can determine the peeling bonding strength of vulcanized rubber or thermoplastic rubber and hard plate.
Zhongke Testing Reliability Experiment Center has the ability to test the reliability performance of various vulcanized rubbers or thermoplastic rubbers, and provides professional bonding strength testing services for vulcanized rubbers or thermoplastic rubbers with hard plates.

Vulcanized rubber: flat vulcanizing machine vulcanizing type, vulcanizing tank vulcanizing type, continuous vulcanizing type, special vulcanizing type, etc.
Thermoplastic rubber: polystyrene, polyurethane, polyolefin, polyester, ethylene-vinyl acetate copolymer, ethylene-acrylate copolymer, polyethylene-butyl rubber joint copolymer, etc.

The sample is prepared by bonding a strip of rubber to a hard plate and peeling it off at a peeling angle of 9o°. Determine the force required to peel off the rubber and the hard plate. The maximum peeling force that the sample can withstand per unit width is the 90° peel bonding strength of the rubber and the hard plate.

GB/T 7760-2003 Determination of adhesion strength between vulcanized rubber or thermoplastic rubber and hard plates 90° peeling method
ISO 813-2016 Determination of the bonding strength of vulcanized rubber or thermoplastic rubber to rigid sheets 90° peeling method
BS ISO 813-2016 Vulcanized rubber or thermoplastic rubber - Determination of adhesive strength of rigid bodies. 90 ℃ peeling method
NF ISO 813-2016 Determination of the bonding strength of vulcanized rubber or thermoplastic rubber to rigid sheets 90° peel method
DIN ISO 813-2018 Determination of the bonding strength of vulcanized rubber or thermoplastic rubber to rigid sheets 90° peel method