Mildew resistance test of non-metallic gasket materials

The mildew resistance test of non-metallic gasket materials is to measure the impact of mildew on the properties of synthetic polymer materials in the form of mildew. The prepared objects can be tubes, rods, sheets and film materials, and the changes in optical, mechanical and electrical properties after mildew are measured.
Zhongke Testing Reliability Experiment Center has the capability to test the reliability performance of various non-metallic gasket materials, and provides professional reliability testing services such as mildew resistance test, tensile strength test, softness test, compression rate rebound rate test and other non-metallic gasket materials.

The synthetic polymer component of these materials is generally antifungal because it does not serve as a carbon source for fungal growth. Usually other ingredients, such as plasticizers, cellulose, lubricants, stabilizers, colorants, are the main cause of mold attack on plastic materials. It is very important to be able to resist microbial erosion under conditions conducive to corrosion at temperatures of 2°C to 38°C and relative humidity of 60% to 100%.

Mildew resistance test needs to measure the following performance changes of synthetic polymer materials after mildew: tensile strength, rigidity, hardness, light transmission, turbidity, water vapor dispersion, dielectric strength, dielectric constant, insulation resistance, arc resistance

GB/T 20671.11-2006 Non-metallic gasket material classification system and test methods Part 11: Determination method of mildew resistance of synthetic polymeric materials
ASTM D149 Test Method for Power Frequency Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials
ASTM D150 Solid Electrical Insulating Materials (Constant Dielectric) AC Loss Characteristics and Dielectric Constant Test Method
ASTM D257 DC resistance or conductance test method for insulating materials
ASTM D495 Test method for high voltage and low current dry arc resistance of solid electrical insulating materials
D618 plastic conditioning method
for testing ASTM D638 plastic tensile properties test method
ASTM D747 Test Method for Determination of Apparent Bending Coefficient of Plastics by Cantilever Bending Method
ASTM D785 Rockwell Hardness Test Method for Plastics and Electrical Insulating Materials
ASTM D1003 Test Method for Opacity and Transmittance of Transparent Plastics
ASTM D1708 Test Method for Determination of Tensile Properties of Plastics Using Micro Tension Specimens
0 ASTM E96 Water Vapor Transmission Test Method
1 for Materials ASTM E308 method for calculating object color using CIE system