Quality Identification of Metal Slitter

metal slitting machine is a device for slitting wide roll materials. The structure of the slitting machine consists of equipment such as unwinding (uncoiling), feeding and positioning, slitting and slitting, and winding (winding). Its main function is to cut wide rolls into narrow rolls of a certain size in the length direction to prepare for other subsequent processing steps.
metal slitting machine has a reasonable layout, convenient operation, high degree of automation, high production efficiency and high working precision. It can process various cold-rolled and hot-rolled coil plates, silicon steel plates, stainless steel plates, color plates, aluminum plates and various electroplated or painted metal plates.
In the case of metal slitting machine quality appraisal, Zhongke Testing can provide metal slitting machine quality appraisal services.

metal slitting machine equipment is divided into three categories: simple metal slitting machine, hydraulic semi-automatic metal slitting machine, and fully automatic metal slitting machine.

QB/T 5235-2018 Shoemaking machinery slitting machine

The metal slitting machine purchased by a heavy industry company did not meet the technical requirements agreed upon in the agreement, and a dispute arose with the equipment manufacturer.
was entrusted by the court to conduct an appraisal and analysis on "whether there are quality problems" with the metal slitting machine involved in the case.
identification and analysis results: The
identification and analysis expert group discussed and conducted comprehensive quality and technical analysis on the relevant information and on-site investigation of the metal slitting machine involved, and made the following suggestions and conclusions:
1. No jumping phenomenon was seen in the equipment involved during the on-site test;
2. The spacing between the lower straight knife shafts of the equipment involved in the case does not meet the contract conditions;
3. The mechanical design speed of the equipment involved in the case can meet the requirements of the contract;
4. When the equipment involved in the case is divided into three layers of film, the end face of the finished product is uneven, which does not meet the requirements of the contract.